Olivetti Fax-Lab 220 Instructions Manual page 25

• Last broadcast transmission report: contains information about
the last broadcast transmission and may be printed, once
programmed, always and automatically after each broad-
cast transmission or on request at the desired moment.
H
OW TO READ THE REPORTS
• Act. N. Progressive number of the transactions
(transmission/reception) carried out.
• Type Type of transaction:
TX, TX POLLING for transmission.
RX, RX POLLING for reception.
• Dialled Number Fax number of the correspondent that you
selected.
• Name Name of the correspondent you called.
Only displayed if you have saved it on the
one-touch dialling keys or in the speed
dialling codes. This field is not printed on
the activity report.
• Received Id Number (and, sometimes, name) of the
selected correspondent. This number cor-
responds to the number you dialled, only
if the correspondent set his own fax
number correctly. Otherwise, it may be dif-
ferent or not be present at all.
• Date/Time Date and time at which the transaction was
carried out.
• Duration Length of transaction (in minutes and sec-
onds).
• Pages Total number of pages sent/received.
• Result Result of the transaction:
- OK: if the transaction was completed suc-
cessfully.
- ERROR CODE XX: if the transaction was
not completed due to the cause indicated
by the error code (see "Error codes",
chapter "Troubleshooting guide").
T /
O ENABLE DISABLE THE AUTOMATIC PRINTING OF THE
TRANSMISSION AND FAILED TRANSMISSION REPORT
Until the display shows:
The display shows:
The display shows:
Until the display shows:
/ To view the other available options: "TX REPORT: AL-
WAYS" and "TX REPORT: OFF".
FAILED TX REPORT - the fax machine will automatically
print a report only after each failed transmission.
TX REPORT:ALWAYS - the fax machine will automatically
print a report after each transmission irrespective of the
result.
TX REPORT: OFF - the fax machine will not print any
report.
To confirm your choice.
To return the fax machine to the initial stand-by mode.
T /
O ENABLE DISABLE THE AUTOMATIC PRINTING OF THE
BROADCAST TRANSMISSION REPORT
Until the display shows:
The display shows:
The display shows:
Until the display shows:
/ To view the other available option: "BROADC. REP.:OFF".
To confirm your choice.
To return the fax machine to the initial stand-by mode.
T /
O ENABLE DISABLE THE AUTOMATIC PRINTING OF THE
BROADCAST TRANSMISSION DATA
Until the display shows:
The display shows:
The display shows:
Until the display shows:
/ To view the other available option: "DELAY LIST: OFF".
To confirm your choice.
To return the fax machine to the initial stand-by mode.
19