Brother HL-2060 Service Manual page 102

J-2 Separation and feed block (Paper jam)
Possible cause Step
Print Paper 1
Static-charge 2
eliminator
J-3 Fixing and paper delivery block (Paper jam)
Possible cause Step
Fixing unit 1
entrance guide
Fixing unit 2
Separation
guide
Paper delivery 3
actuator
Changeover 4
guide
Delivery rollers
Paper jam
5
remove cover
Rear cover
Check
Is a recommended type of paper being used?
Is the static-charge eliminator dirty?
Check
Is the entrance guide dirty?
Is the separation guide worn or deformed?
Is the paper sensor arm movement smooth?
Is the changeover guide movement smooth?
Is the delivery roller movement smooth?
Are there dirts or flaws on the ribs of the jam
remove cover and rear cover?
VI-20
Result Remedy
No Instruct the user to use
recommended type of
paper.
Yes Clean the static-charge
eliminator.
No Replace the transfer base
assy.
Result Remedy
Yes Clean the entrance guide.
Yes Replace the fixing unit.
Yes Replace the fixing unit.
No Replace the changeover
guide.
No Replace the rear cover
assy.
No Replace the jam remove
cover and the rear cover
assy.