Brother HL-2060 Service Manual page 112

Service Call Message
50 FUSER MALF
51 LASER BD MALF
52 SCANNER MALF
53 DX FAN MALF
54 MOTOR MALF
55 HIGH VOL MALF
61 PROG ERROR
63 D-RAM ERROR
66 NV-W ERROR
67 NV-R ERROR
68 NV-B ERROR
60 SYSTEM ERROR XXXXX
Table 6.4 Service Call Messages
Meaning
Malfunction of fuser
Malfunction of laser beam
detector
Malfunction of laser unit motor
Malfunction of fan motor in the
duplex unit.
Malfunction of main motor
Malfunction of high-voltage
power supply
Malfunction of Transfer roller
ASSY
Program ROM checksum error
D-RAM error
NV-RAM error
NV-RAM error
NV-RAM error
Error in XXXXX.
VI-30
Action
Turn off the printer. Wait 15
minutes, then turn it on again.
See M-14.
Turn off the printer. Wait a few
seconds, then turn it on again.
See M-15.
Turn off the printer. Wait a few
seconds, then turn it on again.
See M-16.
Turn off the printer. Wait a few
seconds, then turn it on again.
Turn off the printer. Wait a few
seconds, then turn it on again.
See M-11.
Turn off the printer. Wait a few
seconds, then turn it on again.
See M-13.
Turn off the printer. Wait a few
seconds, then turn it on again.
Turn off the printer. Wait a few
seconds, then turn it on again.
Turn off the printer. Wait a few
seconds, then turn it on again.
Turn off the printer. Wait a few
seconds, then turn it on again.
Turn off the printer. Wait a few
seconds, then turn it on again.
Turn off the printer. Wait a few
seconds, then turn it on again.