Removing The Power Supply Pcb Assy - Brother PT-9200PC Service Manual

6] Removing the Power Supply PCB Assy

[
(1) Remove the two screws securing the inlet bracket.
(2) Turn the bottom cover over and remove the inlet unit.
Two screws
Bottom cover
Inlet unit
Fig. 2.2-10 Removing the Inlet Unit
(3) Remove the two screws securing the power supply PCB assy.
(4) Release the power supply harness from the hook of the bottom cover, and
lift the power supply PCB assy to remove it.
(5) Lift shield plate B to remove it.
Two screws
Power supply PCB assy
Shield plate B
Bottom cover
Fig. 2.2-11 Removing the Power Supply PCB Assy and Shield Plate B
II - 16