Printing Label Files; Printing A Label File - Brady LabelMark 3.1 User Manual

Printing Label Files

Printing a Label File

Note: To change your printer, see Selecting a Printer or Changing User Defaults.
To print a label file:
1. Display the Print dialog box:
To print without previewing your file, click Print
Or, to preview your file before printing, click Preview
Click Next and Prev to scroll through the pages in your file.
o
Click Zoom In and Zoom Out to look at varying levels of detail.
o
Click Print... to continue.
o
2. From the Print dialog, click Print Calibration Test to confirm that the printer is properly
calibrated. LabelMark prints three concentric rectangles centered on the label and spaced .05"
(1.27 mm) apart. Refer to your printer documentation to adjust the printer.
3. Select your desired print options:
To select a subset of labels and number of copies to print, see Selecting Print Ranges.
If necessary change the Print Position Adjustment settings to fine tune the way your labels
print. These settings are saved with the label file, so you will not have to make the changes
again the next time you open the file.
Printing Label Files
on the Standard toolbar.
on the Standard toolbar:
61