Table of Contents
Advertisement
•
Refresh tab options (refresh data from an external source):
Select the desired Date/TimeRefreshOptions to refresh manually (this is the default setting), or
to refresh automatically upon either opening or printing a file.
Select the desired Imported Data Refresh Options to refresh manually, or to refresh
automatically upon either opening or printing a file.
•
Format tab options (the initial settings when you add text):
Note: These changes take effect for new label files, not for existing files.
Select your desired default text font, size and style.
Set Line Spacing for text editing. Numbers > 100 increase line spacing and < 100 reduce line
spacing.
Set the Expand/Condense width for text editing. Numbers > 100 expand text width and < 100
condense text width.
Set Horizontal and Vertical alignment for text editing.
Select Wiremark to copy text down a label as many times as it will fit.
Designate Automatic Text Formatting to automatically fit text to each line, if desired. When
the end of a line is reached, text size decreases as necessary as each additional character is
added, down to a minimum of four points.
In LabelMark Plus, select the Auto match text size option (also found in the Format drop-
down menu), if desired. Text size and condensing values remain the same for any text added
within a print zone, keeping formatting within the print zone consistent from line to line (this
is done on a zone-by-zone basis).
•
Label tab options (set the default part, part list, etc.):
To select a default part number (the suggested part when you create a new label file):
Click Deselect label to clear the previous default part number.
Select your desired Printer type and Part family.
Select Favorite from the Part list box if you want to default to your favorite list when
creating a new file.
Enter a default terminal block repeat value in the Repeat box. Refer to Setting Continuous
Label and Terminal Block Options for information on terminal block repeat values.
Click the desired Part name from the list if you want to designate a default part.
•
Data Import tab options (set the default data source):
Select the default Data Source Type (if desired) from the drop-down menu (Text, Excel
spreadsheet, Lotus spreadsheet, Access database, or Other data source).
Find and select the Data Source.
If text, choose the Delimiter: Comma, Tab, or Other.
When you are finished setting defaults, click OK. Settings are applied immediately and will remain until
changed.
LabelMark Overview
LabelMark Overview
19
Advertisement
Table of Contents
