Table of Contents
Advertisement
1. Click Add/Edit Label Zones. The screen will display as follows, allowing you to select and define up
to four label zones.
2. In the Label zone drop-down menu, select the zone (1,2,3, or 4) that you want to define. Note: You can
navigate between the zones to modify them using this drop-down menu.
3. In the Shape drop-down menu, select Rectangle/Square, Circle/Oval, or Rounded Rectangle (see
Corner Roundness note in Single label zone – other shape, above).
Note: The first zone's shape displays as "Rectangle/Square" by default. "Empty" displays in zones 2
through 4 until a shape is selected for the specified zone; leaving a zone empty is the same as
removing the zone.
Advanced LabelMark Techniques
Advanced LabelMark Techniques
47
Advertisement
Table of Contents
