Creating A Custom Label Part - Brady LabelMark 3.1 User Manual

5. Click Close when finished.

Creating a Custom Label Part

To create a new label part from scratch:
1. Click the Label Part Setup icon
2. Click the Create New Part tab. LabelMark displays the settings for the active part
(irrelevant settings for the displayed part are disabled).
3. Select the desired Printer type and Part family, if necessary.
4. Modify the label part settings (see Modifying a Label Part). Click Clear at any time to start over.
5. Select Rotated if the label part is physically rotated on the liner.
Advanced LabelMark Techniques
on the Standard toolbar.
Advanced LabelMark Techniques
41