2. Click the Serialization icon
3. Enter data values:
Text or Barcode – Only in LabelMark Plus; select if you want to create text or a barcode.
Serial type – Select the type of serialization from the list (see Serialization Types Table for
details).
Start – Enter the starting value. To create serial numbers with leading zeros, enter the starting
value with zeros. For example, 001 instead of 1.
End – Enter the ending value. You may perform serializations that increment or decrement.
To decrement a serial number, enter a lower value in the End box than you have in the Start
box.
Step – Enter a positive number by which to increment or decrement the count.
Number of labels – The system-calculated number of labels to create based on Start, End and
Step. For example, a Start of 1, End of 3, Step of 1 and Number of labels of 3 would result in
1,2,3. If you change the Number of labels to 6 the system would print the series twice –
1,2,3,1,2,3.
Prefix – Check the box and enter a value that should precede each string. This value is
constant.
Suffix – Check the box and enter a value that should end each string. This value is constant.
Preview – Displays a sample of the first serial number including Prefix and Suffix.
4. Click OK.
See Working with Linked Objects to edit the serialization, if necessary.
Note: In LabelMark the serialization appears alone on a text line. You cannot combine the serialization
with other text. In LabelMark Plus, you can place other text next to a serialization object.
Modifying Serialization
To change, format or delete an existing serialization, see Working with Linked Objects.
Basic LabelMark Techniques
on the Action toolbar.
Basic LabelMark Techniques
29