Table of Contents
Advertisement
Chapter 4
Using the Display Screen, Menu, and Keypad
This chapter provides information about the display screen and menu. It also provides information on
the keys found on the LABXPERT
The Display Screen
When the Power button is pressed, the display screen appears.
Status Bar
The status bar, located on the bottom of the display, indicates the current text line, font size, and label
zone.
Contrast
In order to change the contrast on the display, press
•
Press
•
Press
Menu Basics
This section provides basic instructions on using the menu as well as an overview of the menu
selections. Use the menu and related softkeys to perform many of the label formatting commands.
Note: See Chapter 6 Formatting Labels Using Menu Choices for more information.
Also See Appendix A Menu Tree.
To access the menu:
Step 1.
Press
When the MENU key is pressed, a series of menu choices appears. The gray softkeys correspond
to the menu choices shown on the screen.
User's Manual
TM
printer and their corresponding functions.
The display allows you to see up to
three lines of text and 16 characters per
line. The display auto-scrolls when you
enter more than the maximum displayed
lines or characters. Use the arrows on
your keypad to navigate the screen.
+
to darken.
+
to lighten.
.
and then:
SOFTKEYS
9
Hide quick links:
Advertisement
Table of Contents
