Modifying An Existing Printer Configuration - Compaq t5300 - Thin Client Administrator's Manual

Control Panel
5-20
4. The following panel appears only if you selected "Network" in
step 2. In this panel, enter the network path for the printer. If the
User Defined check box was selected in the previous wizard
panel, also enter the manufacturer and model of the printer.
5. In the next wizard panel, enter a name for the printer then click
the Next button.
6. In the next wizard panel, select whether you want to configure
another printer then click the Next button.
7. After all printer configuration selections have successfully been
completed, click the Finish button.
8. Connect to an RDP session, add the printer, and verify that it is
working properly.
Modifying an Existing Printer
Configuration
To modify an existing printer configuration in the Printers dialog box:
1. Double-click the desired printer icon or select the icon and click
the Properties button. The Printer Properties dialog box is
displayed.
2. Make any necessary modifications, then click the OK button to
save the changes.
www.hp.com Administrator's Guide