Introduction; Image Updates - Compaq t5300 - Thin Client Administrator's Manual

Image Updates

Administrator's Guide
The CE .NET-based terminal offers greater user flexibility than
previous CE .NET products because it can be used from the Explorer
shell (desktop), used strictly with the HP Connection Administrator,
or further locked down into Kiosk mode.
This guide provides the network administrator with instructions for
local and remote configuration of the CE .NET-based terminal and
explains the various utilities used to accomplish this. Typically, a
terminal is configured locally then used as a template for other
terminals, which can then be configured via remote administration
tools.
Server and application connections can be created through the HP
Connection Window or the HP Connection Administrator. A
connection created with one utility will also be available for editing
and configuring in the other utility. Although you can create and edit
connections with either utility, only HP Connection Administrator
provides the functionality to create failover connection groups and set
up user profiles. HP Connection Administrator is also used to
determine the start mode and user interface for the terminal.
Chapters in this guide are specific to the desktop interface, the HP
Connection Window utility, the HP Connection Administrator utility,
and all the programs in the Control Panel.
HP provides periodic updates to the image for the HP Compaq t5300,
t5500 and t5510 thin clients. Check the HP support site for important
documentation that provides specific information for your image
version. Support documentation can be found at
http://welcome.hp.com/country/us/en/support.html
www.hp.com

Introduction

.
1
1-1