Removing and instaling wheel
bearings
Place the wheel on two wooden blocks so that
•
the brake disc is free.
Removing left bearing
Take out circlip (1) with Seeger circlip pliers.
•
Place the protective ring (2), BMW No. 31 3 610,
•
in position with the open side upwards.
Pull out wheel bearing (3) with internal puller,
•
BMW No. 00 8 570, and insert,
BMW No. 00 8 573.
Removing right bearing
The right bearing has no circlip.
•
Place the protective ring in position with the open
•
side against the wheel hub.
Pull the bearing out in the same way as for the left
•
bearing.
36.6
1
3
2
31 3 610
Installing left and right bearings
Heat the bearing seat to 100 °C.
•
Apply a thin coat of Loctite 638 to the outer
•
bearing race.
Drive the bearing in with a drift,
•
BMW No. 36 3 660/670.
Install the circlip at the left bearing.
•
00 8 570
00 8 573
LT360030