Maintenance - Blizzard 810SS Assembly & Operation Manual

MAINTENANCE

Check fasteners for tightness. Torque to specifications.
Check hoses for wear and leaks.
Check cylinders for leaks; inspect rod ends for corrosion & pitting
Lubricate all exposed cylinder rod ends with liquid white lithium grease to
prevent corrosion.
Check cutting edges and plow shoes for wear. NOTE: Do not discard
plow shoe washers, these should be retained for different shoe
adjustments.
Clean and lubricate all electrical plugs and connections with dielectric
grease. Clean and install all dust caps prior to storing.
Lubricate all pins and bushings, inner slide box and A-frame latch with
NLGI Grade 2 multi-purpose lithium complex grease with molybdenum
(MPGM) ) to maintain consistent operation
Clean and paint all scratches or exposed metal with Blizzard touch-up
paint
Check the hydraulic oil level. Never mix different types of fluid.
Change the hydraulic fluid as specified in your Skid Steer owner's
manual.
Check the trip spring adjustment. Properly adjusted tension will allow a
sheet of paper to pass between the 3rd and 4th coils of the spring.
Adjust the wing spring as needed or install an optional second extension
spring for increased return speed.
Pressure wash and dry the entire snowplow prior to storing
Cover the snowplow with a tarp if stored outside. This will protect your
plow from sun fading and inclement weather which can lead to
accelerated corrosion.
REMOVING FROM STORAGE
1. Perform all regular maintenance.
2. Replace the hydraulic fluid in the hydraulic system. Prolonged storage could result in condensation build-up.
3. Follow the mounting procedure on the Mounting & Dismounting label.
4. Initiate all of the functions & test before using.
MAINTENANC
PERIODICALLY YEARLY
X
X
X
X
X
X
X
X
X
X
64060 (2005-810&8611SkidSteer).doc
E
X
X
X
X
X
X
X
21