4. Operating Adjustments The Control Panel Control Panel Menu Structure DMX Values In-Depth 5. Appendix A Quick DMX Lesson Keeping Your Mister Stroboto™ As Good As New Returns (Gasp!) Shipping Issues Tech Specs Dimensional Drawings Page 2 Mister Stroboto™ Manual - Rev. A...
Blizzard Lighting™ assumes no responsibility or liability for any errors or omissions that may appear in this user manual. Blizzard Lighting™ reserves the right to update the existing document or to create a new document to correct any errors or omissions at any time.
Caution! There are no user serviceable parts inside the unit. Do not open the housing or attempt any repairs yourself. In the unlikely event your unit may require service, please open a support ticket at www. blizzardpro.com/support. Page 4 Mister Stroboto™ Manual - Rev. A (c) 2019 Blizzard Lighting, LLC...
Under normal operating conditions, it should not require replacement. Should the fuse require replacement, please con- tact Blizzard Lighting for instructions, or to return your unit for service. Connecting A Bunch of Mister Stroboto™ Fixtures You will need a serial data link to run light shows using a DMX-512 controller or to run shows on two or more fixtures set to sync in mas- ter/slave operating mode.
Step 3: Connect other fixtures in the chain from output to input as above. Place a DMX terminator on the output of the final fixture to ensure best communication. Page 8 Mister Stroboto™ Manual - Rev. A (c) 2019 Blizzard Lighting, LLC...
After finding the desired position, retighten both knobs. • When selecting installation location, take into consideration lamp replacement access (if applicable) and routine maintenance. • Safety cables MUST ALWAYS be used. Page 9 Mister Stroboto™ Manual - Rev. A (c) 2019 Blizzard Lighting, LLC...
Please be aware, you should have a qualified electrician performing all of your electrical connection needs. Be sure to complete all rigging and installation procedures before connecting the main power cord to the appropriate wall outlet. Page 10 Mister Stroboto™ Manual - Rev. A (c) 2019 Blizzard Lighting, LLC...
3.) ¼ Turn Quick Lock Fasteners Securing the Fixture Regardless of the rigging option you choose for your fixtures always be sure to secure your fixture with a safety cable. Page 11 Mister Stroboto™ Manual - Rev. A (c) 2019 Blizzard Lighting, LLC...
4. OPERATING ADJUSTMENTS The Control Panel All the goodies and different modes possible with Mister Stroboto™ are accessed by using the control panel on the front of the fixture. There are 4 control buttons to the right of the LCD display which allow you to navigate through the various control panel menus.
IP Address xxx.xxx.xxx.xxx Subnet Mask xxx.xxx.xxx.xxx Universe 000-255 System Info Firmware Vx.xx Time Info Power on (xxxh) Last Run (xxxh) Temperature LED Temp (xxxC/F) Temp Unit Celsius Fahrenheit Page 13 Mister Stroboto™ Manual - Rev. A (c) 2019 Blizzard Lighting, LLC...
It is flexible, robust, and scalable, and its ability to control everything from dimmer packs to moving lights to foggers to lasers makes it an indispensable tool for any lighting designer or lighting performer. Page 16 Mister Stroboto™ Manual - Rev. A (c) 2019 Blizzard Lighting, LLC...
Keeping Your Mister Stroboto™ As Good As New The fixture you’ve received is a rugged, tough piece of pro lighting equip- ment, and as long as you take care of it, it will take care of you. That said, like anything, you’ll need to take care of it if you want it to operate as designed.
Neutrik AG, Neutrik USA, or any related entity. Neutrik® and powerCON® are registered trademarks of Neutrik AG. Page 18 Mister Stroboto™ Manual - Rev. A (c) 2019 Blizzard Lighting, LLC...
Need help?
Do you have a question about the Mister Stroboto and is the answer not in the manual?
Questions and answers