Table of Contents
Advertisement
4.4 SCSI Switch Port Configuration
The SCSI Switch has an internal memory device that retains the current
configuration and setup information. Switch port, termination, serial port, and
control parameters are saved as they are entered on the front panel.
4.5 SCSI Switch Default Configuration
The SCSI Switch default configuration as shipped from the factory is defined
below.
PORTS: A1, B2
TERMINATION: SC121A: All Off; SC120A-R2: A, B On/1, 2, Off
SERIAL PORTS: 9600 bps
SWITCH NUMBER: 01
TEMPERATURE ALARM: 40° Celsius (104˚F)
FRONT PANEL: Unlocked, password 0000
CHAPTER 4: Operator Controls and Indicators
21
Advertisement
Table of Contents
