4. Operator Controls and
4.1 AC Power Switch
The AC power switch is located on the SCSI Switch's rear panel. Move it to the "|"
position to turn on the switch.
Always turn on the SCSI Switch before powering SCSI devices and
computers. This will ensure that devices are found when the system
boots up.
4.2 LCD Display, Keypad, and Indicators
4.2.1 LCD D
ISPLAY
The LCD display shows the selection parameters available.
>
>
>
CHAPTER 4: Operator Controls and Indicators
Indicators
SET PORTS
SET TERMINATION
DISPLAY PORTS
DISPLAY ACTIVITY
DISPLAY POWER TEMP
FRONT PANEL LOCK
SET SERIAL PORTS
SET SWITCH NUMBER
SET TEMP LIMIT
DISPLAY VERSION
Figure 4-1. The LCD display's main menu.
NOTE
17