v Hard disk drives
v Tape drives
v CD-ROM drives
v Removable media drives
Internal drives are installed in bays. Within this book, the bays are referred to
as bay 1, bay 2, and so on.
When you install an internal drive, it is important to note what type and size
of drive you can install in each bay. Also, it is important to correctly connect
the internal drive cables to the installed drive.
Drive specifications — small form factor desktop model
Your computer comes with the following IBM-installed drives:
v A CD-ROM drive in bay 1 (some models)
v A 3.5-inch hard disk drive in bay 2
v A 3.5-inch diskette drive in bay 3
Models that do not have drives installed in bay 3 have a static shield and bay
panel installed.
The following table describes some of the drives you can install in each bay
and their height requirements.
58
User Guide