RED EPIC-M Operation Manual page 61

NOTE: When fully inserted, the SSD media protrudes slightly from the SSD slot as indicated above.
When SSD media is inserted into the camera, the camera will recognize if the media is unformatted:
On LCD, EVF and external monitors, in the media section of the GUI, NONE will be displayed twice (as
-
opposed to when no media is inserted, the GUI displays NONE with three dashes below "---").
On REDMOTE, NONE will be displayed twice (as opposed to when no media is inserted, the GUI
-
displays NONE with three dashes below "---").
On the Side Handle, NA will be displayed (same as if no media is present).
-
To format the media select SECONDARY MENUS > MEDIA > FORMAT MEDIA.
When FORMAT is selected, a FORMAT dialog box will appear allowing you to add Camera Identity and
3D Position properties when formatting. When desired options are set, select FORMAT.
NOTE: If any clips will be erased on the attached media, you will be informed of the number.
60 60
COPYRIGHT © 2012 RED Digital Cinema 955-0002_v3.2, Rev-A1