RED EPIC-M Operation Manual page 181

POWER UP
CONNECTED TO CAMERA
If the REDMOTE is physically attached to a camera, when the camera is powered up the REDMOTE will
automatically power up along with the camera.
NOT CONNECTED TO CAMERA
To manually power up the REDMOTE, slide and hold the Power / Key Lock Switch in the down direction
for 2 seconds, then release.
POWER DOWN
USING CAMERA
When REDMOTE is connected to the camera and the camera is powered down, the REDMOTE will also
power down. When disconnected from the camera, the REDMOTE will not power down with the camera.
USING REDMOTE
To power down REDMOTE, slide and hold the Power / Key Lock Switch in the down direction for 5
seconds.
Or slide and hold the Power / Key Lock Switch in the down direction momentarily, then release. A screen
will display with options to power down the REDMOTE, the Camera, or REDMOTE and Camera
together. Select the desired option and press the ENTER key in the REDMOTE Navigation Group.
NOTE: Wireless mode shown. When docked to camera, SHUTDOWN CAMERA is not displayed.
180 180
COPYRIGHT © 2012 RED Digital Cinema 955-0002_v3.2, Rev-A1