RED EPIC-M Operation Manual page 152

IN / OUT POINT MARKER
Allows you to set In and Out Points during clip playback. This allows you to playback only a certain
portion of the clip as desired. Helps when the clip is rather long and you want to focus on a particular
segment. The In (Red) and Out (Green) points will be displayed in the Clip Playback Status Bar. You can
use the navigation group to select the exact location of the In and Out Points if desired.
FRAME-BY-FRAME REVERSE / FORWARD
Allows you to move through the clip frame-by-frame in the reverse direction.
PLAY / PAUSE
Allows you to play and pause the clip.
PLAY ONCE / LOOP
Allows you to choose to play the clip one time or to loop the clip in the player. Loop is shown below.
151
955-0002_v3.2, Rev-A1 COPYRIGHT © 2012 RED Digital Cinema