1A. Setting Up Service; Setting Up Your Phone - Sanyo SCP-2700 User Manual

1A. Setting Up Service

Setting Up Your Phone (page 2)
Activating Your Phone (page 3)
Setting Up Your Voicemail (page 3)
Getting Help (page 4)

Setting Up Your Phone

1.
Install the battery.
Insert the battery into the opening on the back of the
phone, making sure the connectors align (
gently press it down (
Replace the battery cover and press it down until the
latch snaps into place (
2 1A. Setting Up Service
All manuals and user guides at all-guides.com
), and
).
and ).
2.
Press and hold to turn the phone on.
If your phone is activated, it will turn on, search for
service, and enter standby mode.
If your phone is not yet activated, see "Activating Your
Phone" on page for more information.
3
3.
Make your first call.
Use your keyboard to enter a phone number.
Press .
Your phone's battery should have enough charge for
Note
your phone to turn on and find a signal, set up your
voicemail, and make a call.You should fully charge your
battery as soon as possible. See "Charging the Battery"
on page 13 for details.