Installing Your Speaker System - Pioneer SC-65 ELITE Operating Instructions Manual

03
Bi-wiring your speakers
Your speakers can also be bi-wired if they support bi-amping.
! With these connections, the Speaker System setting makes no difference.
CAUTION
! Don't connect different speakers from the same terminal in this way.
! When bi-wiring as well, heed the cautions for bi-amping shown above.
%
To bi-wire a speaker, connect two speaker cords to the speaker terminal on the receiver.
Using a banana plug for the second connection is recommended.

Installing your speaker system

At the very least, front left and right speakers only are necessary. Note that your main surround speakers should
always be connected as a pair, but you can connect just one surround back speaker if you like (it must be con-
nected to the left surround back terminal).
[A] 9.2 channel surround system (Front height/Front wide) connection
! If necessary, select '9.1ch FH/FW' from the Speaker System menu.
See Speaker system setting on page 93 to do this.
! When only connecting one surround back speaker, connect it to the SURROUND BACK L (Single) terminals.
Front height right
Front wide right
Front right Subwoofer 1
LINE LEVEL
INPUT
FRONT SUBWOOFER
1
CENTER
A
FRONT CENTER FRONT HEIGHT
R L R
SPEAKERS
Surround back right
Surround right
23
Connecting your equipment
Front height left
Center Subwoofer 2 Front left
LINE LEVEL
INPUT
SURROUND SURR BACK F HEIGHT F WIDE
2
(Single)
L
R
PRE OUT
B
FRONT WIDE / SURROUND SURROUND BACK
L R L R L R
Surround back left
Surround left
Front wide left
A
L
(Single)