Installing Your Speaker System - Pioneer SCLX59-K Operating Instructions Manual

03
Bi-wiring your speakers
Your speakers can also be bi-wired if they support bi-amping.
! With these connections, the Speaker System setting makes no difference.
CAUTION
! Don't connect different speakers from the same terminal in this way.
! When bi-wiring as well, heed the cautions for bi-amping shown above.
%
To bi-wire a speaker, connect two speaker cords to the speaker terminal on the receiver.

Installing your speaker system

At the very least, front left and right speakers only are necessary. Note that your main surround speakers should
always be connected as a pair, but you can connect just one surround back speaker if you like (it must be con-
nected to the left surround back terminal).
[A] 7.2.2 channel surround system (Surround back/Top middle) connection
! If necessary, select '7.2.2/5.2.2/7.2ch' from the Speaker System menu.
See Speaker system setting on page 110 to do this.
! When only connecting one surround back speaker, connect it to the SURROUND BACK L (Single) terminals.
! In Speaker Setting, when TMd is set to Dolby Sp (Front), Dolby Sp (Surr), or Dolby Sp (SB), connect the top
middle channel to Dolby Enabled Speaker.
Top middle right
Front right Subwoofer 1
LINE LEVEL
INPUT
SUBWOOFER FRONT CENTER SURROUND SURR BACK T MIDDLE
1
2
FRONT CENTER TOP MIDDLE
R L R
SPEAKERS
SELECTABLE
Surround back right
Surround right
26
Connecting your equipment
Top middle left
Center Subwoofer 2 Front left
LINE LEVEL
INPUT
EXTRA 1 EXTRA 2
(Single)
L
R
PRE OUT
EXTRA 1 SURROUND SURROUND BACK
L R L R L R
Surround back left
Surround left
L
(Single)