Locating parts on the system board
Figure 4 shows the location of the parts on the system board.
Figure 4. System board parts locations
assembly
connector
Locating internal drives
Internal drives are devices that your computer uses to read and store data. You can
add drives to your computer to increase storage capacity and enable your
computer to read other types of media. Internal drives are installed in bays. In this
manual, the bays are referred to as bay 1, bay 2, and so on.
When installing or replacing an internal drive, it is important to note the type and
size of the drive that you can install or replace in each bay and correctly connect
12
User Guide
1 4-pin power connector
2 System fan connector
3 Microprocessor fan connector
4 Microprocessor and heat sink
5 Memory slots (4)
6 24-pin power connector
7 Thermal sensor connector
8 Diskette drive connector
9 Cover presence (Intrusion) switch
10 SATA connectors (4)
11 Power fan connector
12 Front panel connector
13 Internal speaker connector
14 Front USB connector 2
15 Clear CMOS (Complementary Metal-Oxide
Semiconductor)/Recovery jumper
16 Front USB connector 1
17 Serial (COM2) connector
18 Serial (COMl) connector
19 CD-IN connector
20 Front audio connector
21 PCI card slots (2)
22 PCI Express x16 graphics card slot
23 PCI Express x1 card slot
24 Battery