Step 3: Configure Individual Tunnel Rules - Cisco RVS4000 - Gigabit Security Router User Manual

Appendix C
Filters Properties
10. If you want to enter a description for your filter, click
the Description tab and enter the description there.
11. Click OK or Close and the New Rule Properties screen
appears with the IP Filter List tab selected. The screen
will contain listings for Router->win and win->Router.
Click OK (Windows XP) or Close (Windows 2000) in the
IP Filter List window.
New Rule Properties

Step 3: Configure Individual Tunnel Rules

Tunnel 1: win->Router
1. On the IP Filter List tab, select filter list win->Router.
IP Filter List Tab
4-Port Gigabit Security Router with VPN
Configuring IPSec with a Windows 2000 or XP Computer
2.
3.
4.
5.
Click the Filter Action tab, and click the filter action
Require Security radio button. Then, click Edit.
Filter Action Tab
On the Security Methods tab, verify that the Negotiate
security option is enabled, and deselect the Accept
unsecured communication, but always respond
using IPSec check box. Select Session key Perfect
Forward Secrecy, and click OK.
Security Methods Tab
Select the Authentication Methods tab, and click
Edit.
Authentication Methods Tab
Change the authentication method to
protect the key exchange (preshared key), and enter
the preshared key string, such as XYZ12345. Click OK.
Use this string to
46