Turning Loudness On/Off; Adjusting Source Signal Levels - Alpine CDA-7832R Owner's Manual

1
1
1 3
2
1
2
3
22
LOUD
INTLZ
PWR
FM-LV HI
1
RDS
FM-LV LO
INTLZ
PWR
Basic Operation

Turning Loudness On/Off

Loudness introduces a special low- and high-
frequency emphasis at low listening levels. This
compensates for the ear's decreased sensitivity
to bass and treble sound.
Press and hold the AUDIO CONTROL button
for at least 2 seconds to activate or deactivate
the loudness mode. The display shows "LOUD"
when the loudness mode is activated.
Note: Depending on the device connected to
the CDA-7832R, not all functions or
display indications will operate as
described. For details, consult your
Alpine dealer.
Adjusting Source Signal
Levels
If the difference in volume level between the
CD player and FM radio is too great, adjust the
FM signal level as follows.
Press and hold the PWR button for at least 3
seconds.
Press the Preset 1 button to select the FM
signal level HI (High) or LO (Low) to make the
signal levels between the FM band and CD
player closer.
Press the PWR button to cancel the adjusting
mode.
English