Low-Power Mode - Olivetti d-Copia 600 Operation Manual

Low-Power Mode

To activate Low-Power mode, press the Energy Saver
key.
On the operation panel, only the Energy Saver,
Power, and Main Power indicators will remain lit.
To resume copying, perform one of the following
actions. The copier returns to a copy-ready condition.
•
•
•
The copier will be ready to copy in 10 seconds.
NOTE: If the copier receives print data in Low-Power mode through an optional printer unit, it will
automatically return and process the job.
Auto Low-Power Mode
In Auto Low-Power mode, the copier automatically switches to Low-Power mode if left idle for a
preset period. The default period for Auto Low-Power mode is 15 minutes.
NOTE: You can adjust the period for Auto Low-Power mode. Refer to Chapter 3 of the Advanced
Operation Guide.
Press any key on the operation panel.
Place originals in the document processor.
Open the document processor.
Basic Operation
3-19