Table of Contents
Advertisement
Adjusting Exposure
Adjust the exposure automatically or manually. [Manual] is selected as the default setting mode.
When selecting [Manual], follow the steps as below.
1
Place the originals in the document processor or on the platen.
2
Press the exposure adjustment key
(
To use the automatic exposure mode,
press [Auto]. The copier determines a
suitable exposure level for copying.
To change the exposure mode from
[Auto] to [Manual], press the exposure
adjustment key (
3
Press the Start key to start copying.
NOTE: By pressing [Exposure], the Exposure Mode
screen will be displayed. You can also adjust the
exposure from this screen.
You can increase or decrease the exposure of the
auto exposure mode. Refer to Chapter 3 of the
Advanced Operation Guide.
You can fix the default setting mode in the auto
exposure mode. Refer to Chapter 3 of the Advanced
Operation Guide.
You can choose the adjustment level from 7 or 13.
Refer to Chapter 3 of the Advanced Operation Guide.
/
) to adjust the exposure level.
/
).
Ready to copy.
11x8½"
Plain
11x8½"
APS
Auto %
Recycled
11x17"
MP tray
100%
Plain
Plain
8½x11"
11x8½"
Reduce
Plain
Plain
/Enlarge
User choice
Function
Basic
Basic Operation
Paper Size
11x8½
100%
Staple Off
Auto
Staple
Exposure
Left Top
Exposure
Staple
Mode
/Punch
Program
3-5
Advertisement
Table of Contents
