General Problems Or An Unsatisfactory Wash Result - Miele Premier W500 Operating Instructions Manual

§
The four feet are not
resting evenly on the
floor.
The spin speed selected
was too low.
These do not indicate a fault. They occur at the end of
a pump sequence as a normal part of the operation.
The water supply
pressure is too low.
Washing powder used
with water softener
tends to become sticky.
The siphon is either
incorrectly positioned or
clogged.
Too vigorous wash
action.
Not enough detergent
used.
No fabric conditioner
used.
Level the machine. See
installation.
Select a higher spin speed
next time.
– Clean the filter in the water
inlet system.
– It may be useful to press
the Water plus button.
Pour washing powder into
the dispenser before adding
any water softener.
Clean the siphon, see
"Cleaning and care -
Cleaning the detergent
drawer".
Programme in gentle action
and more water.
Increase detergent dose to
prevent limescale build up in
laundry.
Use fabric conditioner in last
rinse.
37