Spinning; Final Spin Speed; Rinse And Interim Spin; To Omit The Final Spin (Rinse Hold) - Miele Allerwash W 3574 WPS Operating Instructions Manual

Spinning

Final spin speed

Programme
Hygiene +
Cottons Universal
Minimum iron
Delicates
Silks
Woollens
Express
First wash
Pillows hygiene
Drain/Spin
You can reduce the final spin speed.
However, you cannot select a final spin
speed higher than that shown in the
chart above.

Rinse and interim spin

There is a spin after the main wash and
between the rinses. A reduction in the
final spin speed will also reduce the
interim spin speed.
20

To omit the final spin (Rinse hold)

^ Select the Rinse hold setting. The
rpm
laundry will not be spun and will
1600
remain suspended in the final rinse
1600
water. This reduces creasing if the
900
laundry is not going to be removed
600
from the drum immediately after the
400
end of the programme.
1200
– To start the final spin:
1600
1200 The Rinse hold indicator light above
the "Spin" button will be lit up. Use
1200
the "Spin" button to select the spin
1600
speed you want. The final spin will
then begin.
– To end the programme:
Press the Door button. The water will
drain away. Press the Door button
again to open the door.
To omit rinse and interim spin and
the final spin
^ Select the Without spin setting. The
laundry is not spun after the final
rinse. The water will drain away and
the machine will go straight into the
anti-crease stage.