Table of Contents
Advertisement
Before using the machine for the first
time, ensure that it is correctly
installed and connected. See
"Installation and connection". Also
check that the drain filter is securely
tightened to prevent the risk of water
leaks during use.
For safety reasons spinning is not
possible until the machine has been
prepared for using for the first time. To
activate the spinning function you must
run a wash programme without laundry
and without detergent.
Using detergent could result in an
excessive build-up of foam.
This also activates the ball valve. The
ball valve prevents detergent escaping
from the suds container into the sump
during a wash programme, thus making
maximum use of the detergent.
^ Open the stopcock.
^ Press the I-On/0-Off button in.
^ Turn the programme selector to the
Cottons Universal 40°C position.
^ Press the Start button.
When this programme has finished turn
the programme selector to finish. Your
machine is now ready for using for the
first time.
Before using for the first time
11
Hide quick links:
Advertisement
Table of Contents
