Electronic system lock
The system lock prevents your
machine being used without your
knowledge.
If the system lock has been activated it
is not possible to start a programme.
To activate the system lock
Before you begin, first ensure that:
– The drum door is closed.
– The programme selector is at Finish .
A Switch the machine on with the I-On/
0-Off button.
B Press the button for the Pre-wash
additional option and keep it pressed
in while carrying out steps C to E.
C Slowly turn the programme selector
clockwise stage by stage to Cottons
Universal 60°C .
D Now slowly turn the programme
selector anti-clockwise stage by
stage to Finish .
Changing the programme sequence
E Next slowly turn the programme
selector anti-clockwise stage by
stage to Delicates cold .
The Locked check light (lower right
on the control panel) will flash.
F Then release the Pre-wash button.
G Turn the programme selector to the
Finish position.
H Switch the washing machine off with
I-On/0-Off button.
To deactivate the system lock
Repeat steps A to F. The Locked
check light will go out.
29