Memory Function - Miele W 310 Operating Instructions Manual

If an additional option(s) is selected
for a programme, and / or the spin
speed is altered, the machine stores
these changes in memory at the start
of a programme.
When that particular programme is
chosen again, the display will show the
additional option(s) and / or spin speed
which have been stored for that
programme in the memory.
The washing machine is delivered with
the memory function deactivated.
A
Before you begin, first ensure that:
– The washing machine is switched off.
– The machine is properly closed.
– The programme selector is at Finish .
64
G
A Press the START button and keep it
pressed in whilst carrying out steps
B to C.
B Switch the machine on with the
I-ON/0-OFF button.
C Wait until the START indicator light
comes on . . .
D . . . and then release the START
button.
E Turn the programme selector to the
COTTONS 30°C position:
If the Soak/Pre-wash sequence
indicator light:
F Press the START button to activate or
deactivate the Memory function
option.
G Switch the machine off with the
I-ON/0-OFF button.
The setting you have selected is now
stored in memory and will remain so
until you alter it.
= the Memory func-
tion
.
= the Memory
function
.