Table of Contents
Advertisement
The programme selector is used to set
the basic wash programme and the
temperature for that programme.
Additional options can be added to the
basic programme.
Use the top button to select either the
Short , the Pre-wash or the Soak option.
Use the lower button to select the Water
plus option.
The indicator light will come on to show
that the additional option has been
selected.
If an additional option is chosen, which
is incompatible with the basic
programme, it cannot be selected.
The maximum spin speed which can be
selected depends on the basic
programme chosen.
1300 COTTONS, Quick wash, Starch,
Drain/spin
1200 WOOLLENS, Separate rinse
900 MINIMUM IRON, Mixed wash
600 DELICATES
400 Silks
12
Press the "Spin" button to select a
different spin speed. However, you
cannot select a spin speed higher than
the maximum allowed for the basic
wash programme chosen.
The indicator lights show the speed
selected.
You can also omit the final spin.
^ Press the "Spin" button to reach:
– Rinse hold
The laundry is not spun and remains
suspended in the final rinse water.
This reduces creasing if the laundry
is not going to be removed from the
drum immediately after the end of
the programme.
To continue the programme:
^ Select a spin speed.
To finish the programme:
^ Press the Door button.
– Without spin
The laundry is not spun. After the wa-
ter has been drained away the
machine goes straight into the
anti-crease stage. Spinning between
the rinses is also omitted in this
setting.
Hide quick links:
Advertisement
Table of Contents
