Washing Enviromentally And Economically - Miele W 310 Operating Instructions Manual

Table of Contents

Advertisement

– Water consumption and energy
usage are determined by the size of
the load. Load to the maximum
recommended for the programme
selected.
– To save energy wash normally and
lightly soiled laundry at lower
temperatures. The 95°C Cottons
programme is probably only needed
in exceptional circumstances, e.g.
for oil based stains or where a very
hot wash is required.
– Use the Mixed wash or the Quick
wash programme for smaller
amounts of laundry.
– A main wash (programme without
pre-wash) is sufficient for cleaning
normally soiled laundry.
– By using the additional option Soak
for heavily soiled laundry you can
select a lower temperature in the
main wash.
– Use the additional option Soak
instead of Pre-wash with heavily
soiled laundry.
If Soak is followed immediately by a
main wash the same suds are used.
14
– Use the Short wash option for
normally or very lightly soiled
laundry.
– Do not exceed the amounts of
detergent which may be
recommended by the manufacturer
on the packaging.
– Reduce the amounts of detergent
with smaller loads, (e.g. with a half
load, approx. one third less
detergent).
– Select the highest suitable spin
speed in the wash programme when
tumble drying afterwards.
– Load recognition and automatic
rinsing can cause the duration of a
programme to vary greatly. The main
wash may be shortened and a rinse
cycle omitted depending on the
amount of laundry.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents