Miele W 310 Operating Instructions Manual page 61

A
Before you begin, first ensure that:
– The washing machine is switched off.
– The machine is properly closed.
– The programme selector is at Finish .
A Press the START button and keep it
pressed in whilst carrying out steps
B to C.
B Switch the machine on with the
I-ON/0-OFF button.
C Wait until the START indicator light
comes on . . .
D . . . and then release the START
button.
G E Turn the programme selector to the
COTTONS 75°C position:
The Soak/Pre-wash sequence
indicator light will briefly flash twice in
2 second intervals, to show that
factory Setting 2 is stored in memory.
F Each subsequent press on the
START button selects a different
setting.
The Soak/Pre-wash sequence indicator
light will flash:
– = Setting 1
higher rinse water level selected
– = Setting 2
higher water level in the main wash
and rinses (factory setting)
– = Setting 3
extra rinse in the
COTTONS programme
– = Setting 4
higher water level in the main wash
and rinses and an extra rinse in the
COTTONS programme
G Switch the washing machine off with
the I-ON/0-OFF button.
The Water plus button has now been
allocated the setting you have chosen.
This setting will remain in memory until
another setting is programmed.
61