Table of Contents
Advertisement
The machine should be connected to a
mains water supply in accordance with
local and national safety regulations.
The German authorities do not require it
to have a non-return valve as the
washing machine has been designed
to comply with DIN regulations.
The machine is designed to operate
with a flow pressure of between 1 and
10 bar. If it is higher than 10 bar it is
essential to fit a reducer valve.
Connection to the mains water supply
should incorporate a mains stopcock
3
with
/
" thread. The stopcock should
4
be fitted by a qualified plumber.
,
The connection point is subject
to mains water pressure. Turn on the
stopcock slowly and check for leaks.
Correct the position of the washer
and union if appropriate.
The washing machine is
for connection to a hot water supply
and connection to a household wa-
ter softener is not recommended.
Only use a genuine Miele hose should
you ever need a replacement or
extension. These are tested to
withstand pressure of at least 70 bar.
In order to protect the water inlet
valve, the two dirt filters - one in the
open end of the inlet hose, one at
the inlet point in the machine must
not be removed.
Longer hoses 2.5 or 4.0 m in length are
available from your Miele dealer or the
Miele Spare Parts Department as
optional extras.
suitable
53
Hide quick links:
Advertisement
Table of Contents
