Black Widow Security OEM UPGRADE SERIES User Manual

OEM UPGRADE SERIES
VEHICLE SECURITY SYSTEM
Standard Features:
Combination LED / Valet switch
Multi-tone siren (115dB)
Dual stage impact detector
Active or passive arming

Optional Features:

Starter disable
Flashing parking lights
Dome light control
Hood and trunk protection
Back-up battery w/charging circuit
Note: Some features may require additional
parts and labor, and may not be appropriate for
certain vehicles. Consult your authorized dealer.

System Operation

ARMING OPERATION

To arm the system press the Lock button on
the factory transmitter:
• The siren will chirp once.
• The parking lights will flash once.
• The LED will start flashing slowly after
5 seconds and the system will be
armed.
30 seconds after Arming, if the system
detects a bad sensor or an open zone, the
siren will chirp and the parking lights will
flash 4 times to indicate a zone is open. The
system will ignore that input, but keep all
other areas protected.
While Armed, the system will trigger if:
• The doors are opened.
• The shock sensor detects an impact to
the vehicle.
• The hood or trunk is opened.*
When triggered, the siren will sound, the
horn will honk*, and the parking lights will
flash* for 50 seconds.
If the same input triggers the system 4 times
during a single arming cycle, the system will
bypass that input, keeping the other zones
protected, until the next time the system is
armed.
If the shock sensor detects a light impact to
the vehicle, the siren will chirp 3 times to
warn away the potential intruder.
*
Optional Feature
PASSIVE ARMING
The passive arming feature automatically
arms the system after closing all doors. The
Passive Arming feature may be enabled during
installation.
To arm the system passively:
1. Turn the ignition key off.
2. Exit the vehicle and close all doors.
• The LED flashes rapidly indicating
that the system is preparing to arm.
(The system can be armed manually
any time.)
• The siren will chirp 30 seconds after
the last door is closed to indicate the
system is armed. NOTE: Opening a
door resets the passive arming timer.
• The doors will lock.†
†
If Passive Locking was added during installation.
NOTE: Enabling the Passive Locking fetures also
enables the Passive Arming feature
1
Version 7.5