Advertisement
Quick Links
R A S 2 0 0
Button 1 LED Button 2
2- Button
Transmitter
Standard Features
The following features are standard with your
RAS 200 Remote Start:
Two button remote control(s)*
Status Indicator (LED)
Valet/Service mode switch
Remote Start capabilities
Remote Heater/AC capabilities
Parking Light Verification
Safety Inputs (Brake & Hood)
Remote Shutdown Operation
Extended Range Receiver
Stop & Go
Auto Cold Start (Protected)
*
S models provided with single transmitter.
Optional Features that you may
add to your RAS 200 (Consult with your
technician)
Remote Keyless Entry (Door
Lock/Unlock)
Trunk/Hatch Release
Window Roll-up
O W N E R S M A N U A L
Button 2 LED Button 3
•• •
••
Button 1
•
3- Button
Transmitter
Note: Some features and options may
require additional parts and labor or may not
be appropriate for certain vehicles.
Automatic Transmission and Electronic Fuel
Injection is required on vehicles for Remote
Start products.
System Operation
Important: Do not operate this remote
auto start in an enclosed garage or area
without proper ventilation. Be sure to famil-
iarize yourself with the features of the
Remote Auto Start Product prior to using the
product.
PROGRAM SWITCH:
The RAS is equipped with a program
switch.This program switch is usually
mounted in a convenient location under
or around the lower dash. If you can not
locate it, ask your installing dealer to
show you it's location. If you desire to put
your Remote Auto Start in Service Mode;
this will allow you to use the optional
keyless entry features only, the vehicle
will not start with the remote control.
To enter the service mode:
1.Turn
ignition
to the
ON posi-
1
Press
+
ON
Hold
+
Advertisement
Related Manuals for Black Widow Security RAS 200
Summary of Contents for Black Widow Security RAS 200
-
Page 1: System Operation
R A S 2 0 0 O W N E R S M A N U A L Note: Some features and options may Button 1 LED Button 2 Button 2 LED Button 3 require additional parts and labor or may not ••... - Page 2 tion. started: Press 2. Press and hold the programswitch for 5 Unlock the door by press- seconds.The LED will turn on solid. 3. ing button #2 on remote Turn ignition off. transmitter (optional). Enter vehicle, turn ignition key to Press To exit Press the on position (Note: Do...
- Page 3 engine will start and run for 30 seconds solid. 4. Release the brake pedal and turn to confirm activation.While in Auto Cold the ignition key to off position and Start Mode LED will double flash. remove. You now may exit the vehicle and lock the doors with the keyless entry Disengaging the auto cold start acti- feature (optional).When re-entering the...
-
Page 4: Safety Features
SAFETY FEATURES: 3. The ignition is turned on.Attempting The RAS will not start the vehicle under the to start the vehicle with the RAS under following conditions: these conditions, the parking lights will flash 4 times to let you know that the 1.