Front Passenger’s Seat Child-Restraint System Installation (Lap/Shoulder Belt) - Mazda 626 Owner's Manual

Essential Safety Equipment
in the rear seat, do not allow the
child to lean over or against the
front door, even if the child is
seated in a child-restraint system.
2-34
Form No. 8P95-EA-00G
J54A2112H
M Front passenger's seat
child-restraint system installation
(Lap/shoulder belt)
1. Slide the seat as far back as
possible.
2. Secure the child-restraint system with
the lap portion of the lap/shoulder
belt. See the instructions on the
child-restraint system for belt routing
instructions.
3. To get the retractor into the
automatic locking mode, pull the
shoulder belt portion of the seat belt
until the entire length of the belt is
out of the retractor. Position the belt
correctly, push the child-restraint
system firmly into the vehicle seat
and be sure the belt retracts as snugly
as possible. Clicking from the
retractor will be heard during
retraction if the system is in
automatic locking mode. If the belt
does not lock the seat down tight,