Mazda 626 Owner's Manual page 129

4. (Manual transaxle)
Depress the clutch pedal all the
way and shift into neutral.
Keep the pedal depressed while
cranking the engine.
(Automatic transaxle)
Place the shift lever in P. If you
must restart the engine while the
vehicle is moving, shift the lever to
N.
Form No. 8P95-EA-00G
n043-9B1E
NOTE
The starter will not operate...
• If the shift lever is not in P or N
(automatic), or
• If the clutch pedal is not
pushed down all the way
(manual).
Driving Your Mazda
n043-10BE
5. Turn the ignition switch to the
START position and hold (up to 10
seconds at a time) until the engine
starts.
n043-5AE
! CAUTION
Don't try the starter for more than
10 seconds at a time. If the engine
stalls or fails to start, wait 10
seconds before trying again.
Otherwise, you may damage the
starter and drain the battery.
n043-4HE
5-5