Mazda 626 Owner's Manual page 253

Hide thumbs Also See for 626:
Table of Contents

Advertisement

In Case of Emergency
2. Turn off the engine of the vehicle
with the booster battery and all
unnecessary electrical loads in both
vehicles.
3. Connect the jumper cables in the
exact sequence as in the illustration.
(1) Connect one end of a cable to
the positive terminal on the
discharged battery
(2) Attach the other end to the
positive terminal on the booster
y
battery
.
(3) Connect one end of the other
cable to the negative terminal
of the booster battery
6-6
Form No. 8P95-EA-00G
(4) Connect the other end to a solid,
stationary, exposed metallic
point (for example, the engine
hanger) away from the
discharged battery
4. Start the engine of the booster
vehicle and run it a few minutes.
Then start the engine of the other
x
.
vehicle.
5. When finished, carefully
disconnect the cables in the reverse
order described in Step 3.
z.
!
WARNING
Connecting to Negative Terminal:
Connecting the end of the second
{
cable to the negative (–) terminal
.
of the discharged battery is
dangerous. A spark could cause
the gas around the battery to
explode and injure someone.
Connect the cable to a point away
from the battery.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents