Hazard Warning Flasher; Overheating - Mazda 626 Owner's Manual

In Case of Emergency

Hazard Warning Flasher

J94A5001
The hazard warning lights warn other
drivers that your vehicle is a traffic
hazard and that they must take
extreme caution when near it.
The hazard warning lights should
always be used when you stop on or
near a roadway.
6-2
Form No. 8P95-EA-00G
071-1A1E
Depress the hazard warning switch
and all four turn signals will flash at
once.
NOTE
• The turn signals don't work
when the hazard warning lights
are on.
• Check local regulations about
the use of hazard warning lights
while the vehicle is being
towed. They may forbid it.
nQ072-3AE

Overheating

If the temperature gauge indicates
overheating, if you experience power
loss, or if you hear a loud knocking or
pinging noise, the engine is probably
too hot.
If this happens:
1. Drive safely to the side of the road
and park off the right-of-way.
2. Set an automatic transaxle in P, a
manual transaxle in neutral. Apply
the parking brake.
3. Turn off the air conditioner.