Olivetti Fax-Lab 105 Instructions Manual page 30

T / /
O CHANGE REPEAT DELETE A TRANSMISSION FROM THE
MEMORY THAT IS ALREADY SET
1. Press the key
until the display shows:
2. Press the key:
The display shows:
3. Press the key:
The display shows:
You can choose any of the following options:
PRINT SETTING? – To print the memory transmission
parameters only. When it has finished printing, the fax ma-
chine returns automatically to its initial stand-by mode.
CANCEL SETTING? – To clear the setting. The fax ma-
chine returns to its initial stand-by mode.
CHANGE PARAM.? – To change the correspondent's
number or the time at which you want to send the document.
4. To view the other available options, press the keys:
| }
/
5. To confirm your choice, press the key:
If you chose "CHANGE PARAM.?", the display shows:
From this point on, follow the procedure described in "To
send a document from the memory" from step 4.
T
O RECEIVE A DOCUMENT
You can set up the fax machine to receive the documents sent by
your correspondents in three separate modes:
• Manual reception, for all occasions in which you are present
and you can therefore answer the calls yourself.
• Automatic reception, for all occasions in which you are out but
want to receive documents anyway. This is the mode originally set
on your fax machine.
• Automatic reception with recognition of the type of call. In
this reception mode, after a given number of rings (default setting:
2 rings), the fax machine connects to the telephone line and is
capable of recognizing whether the incoming call is a fax call or a
telephone call.
6
T
O CHOOSE THE RECEPTION MODE
1. Press the key
until the display shows:
2. Press the key:
The display shows:
3. To view the other available options: "MANUAL" and
"PHONE/FAX", press the keys:
| }
/
4. To confirm the setting, press the key:
5. To return the fax machine to its initial stand-by mode, press
the key:
T
O RECEIVE DOCUMENTS IN THE VARIOUS RECEPTION
MODES
M
ANUAL RECEPTION
1. When the telephone rings, lift the handset to engage the line.
The display shows:
2. As soon as you hear the fax machine signal or if the corre-
spondent asks you to receive a document, press the key:
The display shows:
3. Hang up.
The fax machine starts to receive and the display shows
some information about the reception in progress, including
your correspondent's fax number or, if programmed, his
name.
Once the document has been received, the display shows
the message "RX COMPLETED" for a few seconds and
then the initial stand-by mode.
A
UTOMATIC RECEPTION
After two rings, the fax machine prepares to receive a docu-
ment. The document is received as in manual reception
mode.
A
UTOMATIC RECEPTION WITH RECOGNITION OF THE
TYPE OF CALL
The action taken by the fax machine in this reception mode
depends on who is calling:
- If the caller is another fax machine, after two rings your fax
machine automatically prepares to receive a document.
- If the caller is a telephone, after two rings, the fax machine
emits an acoustic signal for about 20 seconds and the
display shows "LIFT HANDSET". If you do not lift the
receiver within 20 seconds, the fax machine automati-
cally prepares to receive a document.