Setting Some Parameters (Indispensable For Correct Functioning); To Set The Language And The Country Of; Destination - Olivetti Fax-Lab 105 Instructions Manual

H
OW TO GET STARTED QUICKLY
If a voltage drop or power failure occurs, it may be useful to use an emergency telephone.
Connect the fax machine to the power supply
S
ETTING SOME PARAMETERS
Once the fax is connected to the power supply, it automatically runs a
short test to check that its components are working and the display
may show:
the language in which the messages will be displayed or the word
"AUTOMATIC" and, alternating on the second line, the messages
"SET DATE/TIME" and "CHECK PRINT HEAD".
In the first case, to enable the fax machine to work properly, you must
set the language and country in which it is to be used as described in
the procedure below.
In the second case, you can move on to set the date and time directly.
VI
(
INDISPENSABLE FOR CORRECT FUNCTIONING
IMPORTANT
To connect the emergency telephone directly to the
fax machine, remove the cover from the socket for
connecting to the external line and then insert the
plug of the emergency telephone in this socket (see
figure opposite).
In countries where this kind of connection is not al-
lowed (for example, Germany and Austria), connect
the emergency telephone directly to the telephone
wall socket.
IMPORTANT
The plug of the power supply cable may vary from
country to country.
)
T
O SET THE LANGUAGE AND THE COUNTRY
OF DESTINATION
The display shows the language in which the messages
are displayed. For example:
1. To select the desired language, press the keys:
| }
/ The display shows, for example:
2. To confirm the setting, press the key:
The display shows: