Poi Alerts - Navman S series User Manual

POI Alerts

The POI Alert preferences allow you to set a warning chime and/or visual warning to Point of Interest categories that
you have installed via NavDesk (Custom POIs). You may also be able to set warnings to certain POI categories that
were preinstalled on your Navman or available by subscription, such as Safety Cameras.
If you have a route set, the warnings will occur when you are a certain distance (set by the Warning Distance
preference) from the POI on your route.
If you do not have a route set, the warnings will occur when you are in the vicinity of the POI.
3.
Tap a custom POI category.
The activation preferences for the selected category will display.
4.
Complete the following:
If you want to...
display locations in this category on the map
enable a warning chime when locations in this
category are in close proximity
enable a visual warning when locations in this
category are in close proximity
select the distance at which the warnings will
activate
Your preferences are automatically saved.
Then...
select the Display on the map check box.
select the With an audible alert check box.
select the With a visual alert check box.
move the Warning distance slider to select the distance at which the
warnings will activate.
82
S-Series