How Do I Delete A Custom Poi File From My Navman - Navman S series User Manual

4.
Complete the following:
If you want to ...
select an icon to display on the map
screens for POIs of the category
enable a visual warning when a POI of
this category is in close proximity
enable a warning sound when a POI of
this category is in close proximity
select the distance from a POI of this
category at which the visual warning
should display or the warning chime
should sound
select a custom sound alert file to play
when a POI of this category is in close
proximity
5.
Click on Add to device button to add the POI to your Navman.
Note: Each POI file corresponds to a POI category; for example, Hotels .csv will be listed in your Navman as the Hotels category.

How do I delete a Custom POI File from my Navman?

1.
On the Installed POIs section click Delete next to the file name.
The file is removed from the list, but is not yet deleted.
2.
Accept the warning message.
The selected file is deleted.
Then ...
Click Browse to select the icon file from your local or network drive. When you have
located the icon file, select it and click Open.
The icon file must be a bitmap (.bmp) graphic with a minimum size of 6x6 pixels and a
maximum size of 32x32 pixels.
Note: If you do not select a custom icon, a default icon will display.
select the Visual alert check box.
select the Audio alert check box.
select the distance from the Distance box.
Note: To change the units used to measure distance for this POI category, from the
tools menu click on options and from the general option select Use metric units check
box.
Either select a sound file from the list, or
Click Add to select a sound file (.WAV format) from your local or network drive.
When you have located the file, select it and click Open.
Note: If you do not select a custom sound file, a default sound alert will play.
120
S-Series