Nautilus Commercial Series TreadClimber TC916 Assembly Manual page 35

step7:securingconsole
Locate the following for this step:
Parts:
• assembly from step 6
hardware:
• 4 screws (P/n 24162)
Tools:
• 5/32 allen bit
7-1 align the holes on the tubing of the console with
the holes on the handrail and secure Console (P/n
- 17670) in place using 4 screws (P/n - 24162). see
figure 7.
step8:attachinglowerPlasticcovers
Locate the following for this step:
Parts:
• assembly from step 7
• right bottom Plastic Pivot Cover (P/n 17919)
• Left bottom Plastic Pivot Cover (P/n 17918)
hardware:
• 14 screws (P/n 17815)
• 14 washers (P/n 17578)
Tools:
• 1/8 allen bit
8-1 on the right side, attach right bottom Plastic Pivot
Cover (P/n - 17919) using the 7 screws (P/n - 17815)
and 7 washers (P/n - 17578). see figure 8.
8-2 repeat step 8-1 on the left side.
asseMbly InsTRUcTIons
figure 7: securing Console
Console
handrail assembly
figure 8: attaching Lower Plastic Covers
Left bottom
Plastic Pivot
Cover
screws
Washers
Nautilus® TreadClimber® Model TC916 Assembly Manual
screws
base assembly
base assembly
right bottom
Plastic Pivot
Cover