Programmable Functions; Water Plus System - Miele W 3224 Operating Instructions Manual

Programmable functions

Water plus system

This is used to select the water intake
setting for the Water plus additional
option.
There are four different options:
Setting 1:
an increase in the rinse water level
Setting 2:
an increase in the water level in the
main wash and rinses (the washing
machine is delivered with setting 2
programmed as standard)
Setting 3:
an extra rinse cycle in the Cottons and
Minimum iron programmes
Setting 4:
an increase in the water level in the
main wash and rinses and also an extra
rinse cycle in the Cottons and Minimum
iron programmes
Follow steps
and store in memory.
Before you begin, first ensure that:
– The washing machine is switched off.
– The machine is properly closed.
– Make sure that the programme
selector is at the d Finish position.
Press the Start button and keep it
pressed in whilst carrying out steps
- .
Switch the machine on with the
I-On/0-Off button.
58
to to programme
Wait until the Start button indicator
light comes on . . .
. . . and then release the Start
button.
Turn the programme selector to the
Cottons 60°C position:
A P will flash in the display alternating
with the number 1, 2, 3 or 4.
Each subsequent press on the Start
button selects a different setting.
The number alternating with the P in the
display refers to the settings as follows:
1 = Setting 1 is selected
2 = Setting 2 is selected
3 = Setting 3 is selected
4 = Setting 4 is selected
Switch the machine off with the
I-On/0-Off button.
The Water plus button has now been
allocated the setting you have chosen.
This setting will remain in memory until
another setting is programmed.